Filter
Top Products
2
9
Getting Started Getting Started
1-3 1-4
Site Considerations Transport Lock
Environment Conditions You will find a red shipping tab under the top cover (2).
- Install the printer in an area away from any heat source, air conditioner or
strong drafts. Grasp the top cover (2) on the left and right, lift it and remove the transport
- Avoid installing the printer in a dusty or humid environment.
Work Location To ensure maximum protection when transporting the printer, always
- Place the printer on the stand or a flat, solid level area such as a desk.
- Slots and openings in the printer's housing are provided for ventilation; - Remove the output stacker and the mains cable.
always ensure that these openings are not obstructed. - Remove the ribbon cassette.
- When processing fanfold paper always place the printer with its front edge - Pack the printer in its original packing material and ship in its original box.
slightly off the edge of the table.
- Also ensure that the cables at the rear of the printer do not interfere with the
output paper path.
Power Requirements
- No special wiring is required. A typical office wall outlet is sufficient.
- Do not plug into the same wall outlet other equipment besides the printer
such as coffee machines, copy machines or air conditioners.
locking clip (12) from the print head drive belt.
Re-packing Information
- Remove any installed paper handling option.
- Reposition the transport locking clip.