Filter
Top Products
Important Safety Instructions
III IV
Important Safety Instructions S If you’re using an extension cord or power strip with the printer, make sure
Your MTX 1345 printer has been carefully designed to give you years of safe, is less than the extension’s rating. Generally, the total ratings of all
reliable performance. As with all electrical equipment, however, there are a few equipment plugged into any one power line should not exceed 15 amperes.
basic precautions you should take to avoid hurting yourself or damaging the Don’t exceed this unless you know that the power line your equipment is
unit: plugged into has a rating above 15 amperes.
S Read the setup and operating instructions in this manual carefully. Be sure S Aside from the routine maintenance described in this handbook, don’t try to
to save it for future reference. service the printer yourself; opening the cover may expose you to shocks or
S Read and follow all warning and instruction labels on the printer itself. manual -- you might cause damage requiring extensive repair work.
S Unplug the printer before you clean it. Use only a damp cloth -- do not use S If anything happens that indicates your printer is not working properly or
a liquid or aerosol cleaner. has been damaged, unplug it immediately and contact MTX for service.
S Place your printer on a firm, solid surface. If you put it on something S The power cord or plug is frayed or damaged.
unsteady, it might fall and be damaged. If you place it on a soft surface, S Liquid has been spilled into the housing, or the printer has been exposed
such as a rug, sofa, or bed, the vents may be blocked, causing it to to water.
overheat. S The printer has been dropped or its cabinet has been damaged.
S To protect your printer from overheating, make sure no openings on the instructions.
printer are blocked. Don’t put the printer on or near a heat source, such as
a radiator or heat register. If you put the printer in any kind of enclosure,
make sure it is well ventilated.
S Do not use your printer near water, or spill liquid of any kind into it.
S Be certain that your power source matches the rating listed on the back of
the printer. If you’re not sure, check with your dealer or with your local
power company.
S Your printer has a grounded, 3-prong plug as a safety feature, and it will
only fit into a grounded outlet. If you can’t plug it in, chances are you have
a non-grounded outlet; contact an electrician to have it replaced with a
grounded outlet. Do not use an adapter to defeat the grounding.
S To avoid damaging the power cord, don’t put anything on it or place it
where it will be walked on. If the cord becomes damaged or frayed, replace
it immediately.
that the total of amperes required by all of the equipment on the extension
other hazards. Don’t make any adjustments other than those outlined in the
These are some of the things to look for:
S The printer doesn’t function normally when you’re following the operating