Filter
Top Products
Appendix D Philips GP Quick Reference Appendix D Philips GP Quick Reference
D-9 D-10
Table 5: Horizontal Form Handling Table 5 (Cont.): Horizontal Form Handling
Escape Sequence Mnemonic Function Escape Sequence Mnemonic Function
ESC [ P1 ` HPA Horizontal Position Absolute P1 = 0 justification or centring off,
P1 : print position; P1 = 0-9999 P1 = 2 justify text using word spacing
Note: Character ` = 60 hex P1 = 3 justify text using letter spacing
ESC [ P1 a HPR Horizontal Position Relative P1 = 7 flush to right margin
P1 : print position; P1 = 0-9999
ESC [ P1 b RPT Repeat Character for graphics dot pattern P1 : 1/720" = vertical increment
P1 : number of repetitions; P1 = 1-999 P1 = 0-999
Note: the last graphics byte before the P2 : 1/720" = horizontal increment
RPT-Command will be repeated P2 = 0-999
ESC [ P1 b RPT Repeat Character *, ., or ; ESC [ 24 h SM Set Mode Unidirectional Printing
P1 = number of repetitions; P1 = 1-999 Note: the operator panel setting UNI-
Note: the last character before the RPT- DIRECT.CMD must be set to YES
Command will be repeated
ESC H HTS Set Horizontal Tab at current print position
ESC [ P1 g TBC Tabulation Clear P1 = 0 - 7
P1 = 0 : at active print pos. reset of tab
and margin marker, at actual
print position
P1 = 3 : reset of all horizontal tabs and
margin markers
P1 = 4 : reset of all vertical tabs and
margin markers
ESC [ P1 ; P2 q SLRM Set Left and Right Margin
P1 : left margin
P2 : right margin
ESC ; SLM Set Left Margin at current print position
ESC 9 SRM Set Right Margin at current print position
ESC [ P1 SP F JFY Justify
P1 = 6 centre text between margins
ESC [ P1 ; P2 SP G SPIVH Spacing Increment Vertical and Horizontal
ESC [ 24 RM Reset Mode Unidirectional Printing
ESC [ P1 y SSS Select Horizontal Step Size;
P1 10 cpi 12 cpi 15 cpi prop. 14.4 cpi 18 cpi
0 1/10 1/12 1/15 prop. 1/14.4 1/18
1 1/10 1/12 1/15 1/10 1/14.4 1/18
2 1/20 1/24 1/30 1/30 1/20 1/20
3 1/30 1/36 1/45 1/30 1/30 1/30
4 1/60 1/72 1/90 1/60 1/60 1/60
5 1/120 1/120 1/120 1/120 1/120 1/120
6 1/180 1/180 1/180 1/180 1/180 1/180
7 1/360 1/360 1/360 1/360 1/360 1/360
Note: the values in the table are in inches