Filter
Top Products
Appendix D Philips GP Quick Reference Appendix D Philips GP Quick Reference
D-17 D-18
Table 7 (Cont.): Graphics Modes Table 8: Barcode Printing (for detail information see Appendix G)
Escape Sequence Mnemonic Function Escape Sequence Mnemonic Function
ESC [ P1 h SM Set Mode Dot Graphics
P1 = graphics resolution
P1 = 2 5: 72x60 dpi dot format (VxH) BH Barcode Header
P1 = 2 6: 72x72 dpi dot format (VxH) P2 : Barcode typ
P1 = 2 7: 144x120 dpi dot format (VxH) P3 : Height of barcode
P1 = 2 8: 144x144 dpi dot format (VxH) P4 : Width of the thin bars
ESC [ P1 RM Reset Mode Dot Graphics P6 : Ratio width to thin
P1 = graphics resolution P7 : Uni-directional or bidirectional
P1 = 2 5: 72x60 dpi dot format (VxH) printing
P1 = 2 6: 72x72 dpi dot format (VxH) P7 = 0 : or not programmed: means no
P1 = 2 7: 144x120 dpi dot format (VxH) changes
P1 = 2 8: 144x144 dpi dot format (VxH) P7 = 1 : uni-directional printing in LQ
ESC [ ; P2 ; P3 ; P4 ; P5 ; P6 ; P7 SP z
P5 : Width of the thin gaps
P7 = 2 : bi-directional printing in LQ
P7 = 3 : uni-directional printing in NLQ
P7 = 4 : bi-directional printing in NLQ
Note: A switch from uni-directional to bi-
directional printing is only possible if the
parameter UNI-DIRECT.CMD is set to YES
via operator panel or ESC-sequence.
ESC [ ? 0 h SMBC Set Mode Barcode
ESC [ ? 0 RMBC Reset Mode Barcode