Filter
Top Products
30
Resetting the Lamp Timer
1. Press the Menu button on the projector or remote control.
2. Highlight the
Reset menu and press the Select button.
3. Select
Lamp Hours Reset.
4. When you see a prompt asking whether you want to execute the command, highlight
Yes
and press the
Select button.
5. When you’re finished, press
Esc or Menu.
The lamp usage timer doesn’t register until you’ve used the lamp for at least 10 hours.
Storing the Projector
If you need to store the projector for awhile, do the following:
■ Make sure the temperature and humidity of the storage area are within the recommended
range for the projector (14 to 140 °F [-10 to 60 °C] and 10 to 90% relative humidity).
■ Attach the lens cover and retract the feet.
■ Remove the battery from the remote control.
■ Package the projector in its original packaging or equivalent (as described in the following
section).
Transporting the Projector
Note: EPSON shall not be liable for any damages incurred during transportation.
The projector contains many glass and precision parts. If you need to transport it, follow these
guidelines to prevent damage:
■ When shipping the projector for repairs, use the original packaging material if possible. If
you do not have the original packaging, use equivalent materials, placing plenty of
cushioning around the projector. Be sure the carrier is capable of transporting fragile
equipment and is aware that the projector is fragile.
■ When you are hand-carrying the projector, grip the recessed handles on the sides.