Filter
Top Products
Making Detailed Adjustments 37
■ HDMI Video Range
Note: This setting can be used only when either HDMI1 or HDMI 2 is selected as the image
source (see page 23).
If your video equipment has an HDMI port and you’ve connected it to the projector
using an HDMI cable, set the level of the projector to match that of the video equipment.
When this setting is turned on, the projector disregards the EPSON Super White setting.
■ Brightness Control
This setting controls the light output from the projector. On high, the lamp uses 170 W
of power. On low, the lamp uses 135 W.
Sharpness and Picture Quality Settings
If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to
correct it.
■ Sharpness
Use this function to make lines and edges appear more distinct in the image. This setting
is stored separately for each image source and color mode setting. You can select
Standard to adjust the sharpness of the entire image, or select Advanced to access the
following submenu:
Choose
Thin-Line Enhancement to sharpen details such as hair and clothing. Choose
Thick-Line Enhancement to sharpen large contours and backgrounds.
■ Progressive
The projector uses 3D DigiScan HD Circuitry Processing for video-sourced images. For
film-sourced images, the projector uses 3-2 pulldown detection and optimizes the image
accordingly.
Signal Æ HDMI Video Range
Image Æ Brightness Control
Image Æ Sharpness
Signal Æ Progressive