Filter
Top Products
Connecting a Printer or Other Device
Your computer has one bi-directional parallel and two serial
ports. To connect a printer or other peripheral device, follow
the appropriate instructions below.
Using the parallel port
Follow these steps to connect a parallel printer to your
computer:
1. Plug the connector end of the printer cable into the
computer’s
PARALLEL
port. If the connector has retaining
screws, tighten them.
2.
Connect the other end of the cable to the printer. To secure
the cable, squeeze the clips at each side of the printer port
and push them into place.
3.
Plug the printer’s power cord into a grounded electrical
outlet.
Using the serial ports
If you have a printer, modem, or other device with a serial
interface, you can connect it to one of the serial (R5-232C) ports.
Make sure you have a cable compatible with a DB-9P connector.
To connect a serial device, insert the connector into one of the
ports marked
COM1
and COM2. If you are connecting only one
serial device, use the
COM1
port. If you want to assign
COM1
as
COM3
or
COM2
as
COM4,
see
Chapter 3 for information on
jumper settings.
1-6 Setting Up Your System