Filter
Top Products
CONFIDENTIAL
RP-U420 Printing paper commands ESC f
Ver. 1.0
p. 53
ESC f
S
ETTING
COMMAND
[Name]
Set validation paper waiting time
[Format]
ASCII ESC f
t1 t2
Hex 1B 66
t1 t2
Decimal 27 102
t1 t2
[Range]
0 ≤
t1
≤ 15
0 ≤
t2
≤ 64
[Default]
t1
= 0,
t2
= 10
[Description]
Sets the time that the printer waits for validation paper to be inserted and the time from insertion of the
validation paper to the start of printing.
•
t1
specifies the wait time for validation paper to be inserted as [
t1
× 1] minutes.
• When
t1
is set to 0, the printer waits until validation paper is inserted.
•
t2
specifies time from insertion of the validation paper to the start of printing as [
t2
× 0.1] seconds.
[Notes] ■ The setting values for this command are used for validation paper insertion.
■ When the waiting time
t1
set by this command has passed, even though the validation paper is not
detected, the printer ends the validation paper waiting state. Then the printer selects both paper
sources—journal and receipt—for printing. If data is in the print buffer, the print data is printed on both
journal and receipt paper.
■ Waits for a validation paper to be inserted when the printer recovers from an error.
Program Example
PRINT #1, CHR$(&H1B);"f";CHR$(15);CHR$(20);
PRINT #1, CHR$(&H1B);"c0";CHR$(4);
←
Select paper type
Printing paper commands