Filter
Top Products
CONFIDENTIAL
RP-U420 Miscellaneous commands GS I
Ver. 1.0
p. 63
n
= 2: Type ID
[Notes] ■ The printer transmits the status after confirming the host is ready to receive data. If the host computer is
not ready to receive data, the printer waits until the host becomes ready.
■ When the parameter (1 ≤
n
≤ 3) or (49 ≤
n
≤ 51) is specified, the printer transmits one byte code.
■ When the parameter (65 ≤
n
≤ 67) or (
n
= 69) is specified, the printer transmits following data string.
(1) Header (<5F>H)
(2) Printer information (multiple bytes)
(3) Terminator (<00>H)
Bit Off/On Hex Decimal Function
0 On 01 1 Two-byte character code supported.
1 Off 00 0 Manual cutter installed.
On 02 2 Autocutter installed.
2 Off 00 0 Reserved
3 Off 00 0 Reserved
4 Off 00 0 Not used. Fixed to Off
5 Off 00 0 Reserved
6 Off 00 0 Reserved
7 Off 00 0 Not used. Fixed to Off
Program Example
PRINT #1, CHR$(&H1D);"I";CHR$(1);←
Transmits printer ID