Filter
Top Products
CONFIDENTIAL
RP-U420 Miscellaneous commands DLE DC4
Ver. 1.0
p. 76
■ ■ ■
more
■ ■ ■
more
DLE DC4
E
XECUTING
COMMAND
[Name]
Generate pulse at real-time
[Format]
ASCII DLE DC4
nmt
Hex 10 14
nmt
Decimal 16 20
nmt
[Range]
n
= 1
0 ≤
m
≤ 1
1 ≤
t
≤ 8
[Default]
None
[Description]
Outputs the pulse specified by
t
to connector pin
m
as follows:
• The pulse ON time is [
t
× 100] ms, and the OFF time is [
t
× 100] ms.
[Notes] ■ The printer executes this command upon receiving this command.
■ This comand cannot be executed when the unrecoverable error occurs.
■ With a serial interface model, this command is executed even when the printer is offline, the receive buffer
is full, or there is an error status.
■ With a parallel interface model, the printer cannot receive data when it is busy; therefore this command
cannot be used under the following conditions.
• When DIP Switch 1-6 is On: receive buffer-full.
• When DIP Switch 1-6 is Off: receive buffer-full, offline, error status.
■ This command is executed any time the data sequence <10>H<14>H<
n
><
m
> <0> is received, even if it
appears as part of another command.
<Example>
In ESC *
m nL nH d1 ... dk
,
d1
=<10>H,
d2
=<14>H,
d3
=<1>,
d4
=<0>,
d5
=<5>
m
Function
0 Drawer kick-out connector pin 2
1 Drawer kick-out connector pin 5
Miscellaneous commands