Filter
Top Products
138 EPSON S5U1C62000A MANUAL
(S1C60/62 FAMILY ASSEMBLER PACKAGE)
CHAPTER 9: DEBUGGER
9.7.2 Executing from Menu or Tool Bar
The menu and tool bar are assigned frequently-used commands as described in Sections 9.5 and 9.6. A
command can be executed simply by selecting desired menu command or clicking on the tool bar button.
Table 9.7.2.1 lists the commands assigned to the menu and tool bar.
Table 9.7.2.1 Commands that can be specified from menu or tool bar
Command Function Menu Button
lf Load IEEE-695 absolute object file [File | Load File...]
lo Load Intel-HEX file [File | Load Option...]
gExecute program successively [Run | Go]
g <address> Execute program to <address> successively [Run | Go to Cursor]
gr
Reset CPU and execute program successively
[Run | Go from Reset]
s Step into [Run | Step]
nStep over [Run | Next]
com Load and execute command file [Run | Command File...] –
rst Reset CPU [Run | Reset CPU]
bp, bpc Set/clear PC breakpoint [Break | Breakpoint Set...]
bd, bdc Set/clear data break [Break | Data Break...] –
br, brc Set/clear register break [Break | Register Break...] –
bm, bmc Set/clear multiple break [Break | Multiple Break...] –
bac Clear all break conditions [Break | Break All Clear] –
ta, tac Set/clear trace area [Trace | Trace Area...] –
tc Set trace condition [Trace | Trace Condition...] –
ts Search trace information[Trace | Trace Search...] –
tf Save trace information to a file [Trace | Trace File...] –
u Unassemble display [View | Program | Unassemble]
sc Source display [View | Program | Source Display]
mMix display [View | Program | Mix Mode]
dd Dump data memory [View | Data Dump] –
rd Display register values [View | Register] –
td Display trace information [View | Trace] –
log Turn log output on or off [Option | Log...] –
rec Record commands to a command file [Option | Record...] –
otf, be/bsyn, tim
Set modes [Option | Mode Setting...] –
rom Set ROM type [Option | Rom Type...] –