Filter
Top Products
Command Reference
16 white pixels
16 printed pixels
Total 192 pixels = 24 bytes x 8
Using the ETB command, along with the ESC D and ESC B commands, can drastically
reduce the number of data bytes required to form a print image. Refer to the description
of the SYN command for more information on printing bitmap data.
See Also
SYN
ESC B
ESC D
Expression
ASCII ETB d1…dn
Decimal 23 d1…dn
Hex 17 d1…dn
Parameters
d1…dn n bytes of bitmap print data as per ESC D setting.
FF Form Feed
Description
Prints the contents of the text buffer and advances the print media. The distance the
media will advance depends on two factors: the feed distance specified by the GS L
command and the presence of a punch hole. The LabelWriter printer will advance until
a punch hole is detected or until the feed distance (specified by the GS L command)
has been reached.
When the printer is powered on, the feed distance stored in flash memory is used as the
default distance; the factory default is 7.5 inches. A new feed distance specified by the
GS L command will override the flash memory setting until the printer is either
powered down or a reset command is issued (by the ESC @ or ESC * command).
The FF and ESC E commands are the same and produce the same result.
See Also
ESCE
Expression
ASCII FF
Decimal 12
Hex 0C
Parameters
32