Filter
Top Products
Introduction
The LabelWriter SE450 printer is a compact, thermal-transfer label printer. Featuring both
RS-232 serial and USB connections and including both an ASCII command set as well as
raster printing modes, this printer can fit a wide variety of uses.
The LabelWriter SE450 printer can be readily connected to most common computer systems
using the included Windows, Mac or Linux drivers. Or, for driver-less applications, the
printer can be connected and driven entirely by ASCII Escape commands. This makes the
LabelWriter SE450 an ideal printer to use in embedded applications, including medical
devices, paint matching systems, and so on.
The LabelWriter SE450 printer can accept label material up to 62 mm (2.44") wide, and has
a 57 mm (2.24") wide, 203 dot-per-inch (dpi) print head.
This Technical Reference provides all the information you need to be able to print labels
with the LabelWriter SE450 printer.
In addition, Windows and Mac sample code is available on the CD that came with the
LabelWriter SE450 printer.
In this Technical Reference, you will find:
n Information about how to configure the host computer to communicate with the
LabelWriter SE450 over an RS-232 serial interface.
n Information about programming the LabelWriter SE450 printer
n A list of commands by function
n A complete alphabetical command reference
n A complete list of the standard and extended ASCIIcharacter codes supported by the
printer
n Instructions for configuring the printer
n Printer specifications
As an additional resource, visit the Developer's Forum on the DYMOWeb site.
1
Chapter 1