Filter
Top Products
Commands
GS S Return Printer Status
Description
Returns a single status byte. The printer status is determined by testing the individual
bits within the returned status byte. Only bits that have defined values should be tested.
Do not test bits designated as reserved.
When polling for the status byte, your program must wait for the status byte to arrive.
The printer will take several milliseconds to process the request and then transmit the
status byte. If your program does not wait for a received character, you may receive
erroneous results.
ESC A and GS S are functionally identical. ESC A is provided for compatibility with
the LabelWriter raster bitmap label printer. If possible, you should use GS S in order to
ensure future compatibility.
See Also
ESC A
Expression
ASCII GSS
Decimal 29 83
Hex 1D 53
Parameters
None
Returns
Bit Bit =0 Bit =1
0 LSB Printer ready Printer not ready
1 Not top of form Top of form
2 RESERVED RESERVED
3 RESERVED RESERVED
4 RESERVED RESERVED
5 Paper loaded Out of paper
6 RESERVED RESERVED
7 MSB Printer has no error Printer has error
45