Filter
Top Products
Krautkramer USN 52R/USN 52L Issue 05, 02/00 10-3
Function Description
a-START (GATE) Selection of the start point of the corresponding gate
a-THRESH (GATE) Adjustment of the level of the gate threshold in % of screen height
a-WIDTH (GATE) Adjustment of the gate width related to the start point of the corresponding gate
AMPLITUDE (left) Selection of the measurement mode for the evaluation of the flaw amplitude
ANGLE (center) Entry of the probe’s angle for calculation of the flaw location
ASCAN (center) Setting the echo display (as outline or filled)
AUTO CAL (right) Enables automatic calibration
BAUD RATE (right) Adjustment of the baud rate for data transfer via the RS232 interface
COPY MODE (center) Selection of type and form of printout
CURVE (TCG) Display of DAC curve
DAC ECHO (TCG) Number of reference echoes of the DAC curve; storage of one reference echo in the
recording mode (REC)
DAC/TCG (TCG) Setting of DAC/TCG function
DAMPING (RCVR) Setting of damping resistor
Function directory
Appendix
Krautkramer USN 52R/USN 52L Issue 05, 02/00 10-3
Function Description
a-START (GATE) Selection of the start point of the corresponding gate
a-THRESH (GATE) Adjustment of the level of the gate threshold in % of screen height
a-WIDTH (GATE) Adjustment of the gate width related to the start point of the corresponding gate
AMPLITUDE (left) Selection of the measurement mode for the evaluation of the flaw amplitude
ANGLE (center) Entry of the probe’s angle for calculation of the flaw location
ASCAN (center) Setting the echo display (as outline or filled)
AUTO CAL (right) Enables automatic calibration
BAUD RATE (right) Adjustment of the baud rate for data transfer via the RS232 interface
COPY MODE (center) Selection of type and form of printout
CURVE (TCG) Display of DAC curve
DAC ECHO (TCG) Number of reference echoes of the DAC curve; storage of one reference echo in the
recording mode (REC)
DAC/TCG (TCG) Setting of DAC/TCG function
DAMPING (RCVR) Setting of damping resistor
Function directory
Appendix