Filter
Top Products
LCD screen message Condition/solution
Combination of IP address and There is a problem with the network connection to your product.
subnet mask is invalid. See your
documentation.
Communication error There is a problem with the network connection to your product.
Check the DNS settings for the server, the computer, or the
access point.
Recovery mode An error has occurred during firmware updating. Connect your
product using a USB cable and try downloading the Firmware
Update from Epson's support website. If you still need help,
contact Epson for support.
Note: The ink pads in the printer collect, distribute, and contain the ink that is not used on printed pages.
During the life of your product it may reach a condition where either satisfactory print quality cannot be
maintained or the ink pads have reached the end of their usable life. The Epson Status Monitor, your
LCD, or lights on the control panel will advise you when these parts need replacing. If this happens
during the standard warranty of the product, the exchange of the product or replacement of the pads is
covered under the standard warranty. If the product is out of warranty, the pads can be replaced by any
Epson authorized service provider. The waste ink pads are not a user-replaceable part.
Parent topic: Solving Problems
Related references
Paper Jam Problems Inside the Product
Paper Jam Problems in the Paper Cassette
Paper Jam Problems in the Duplexer (Rear Cover)
Where to Get Help
Related tasks
Checking for Software Updates
Selecting Advanced Fax Settings
Connecting a Telephone or Answering Machine
Related topics
Replacing Ink Cartridges and Maintenance Boxes
Loading Paper
Wi-Fi or Wired Networking
259