Filter
Top Products
10-4 Px Series Application Switch Installation and Configuration Guide
Configuration Displays
The following example illustrates the output from the show configuration command:
* SummitPx1:25 # sh config
#################################################################
# SummitPx1 Configuration
# Software Version 1.1.0b8 (FPGA:511 by build 03/21/02 01:09:31)
#################################################################
#----------------------------------------------------------------
# servers
#----------------------------------------------------------------
config server default max-connections 10000
config server default weight 1
config server slow-start initial-connections 5
config server slow-start interval 5
disable server slow-start
config server index 1 ip 10.65.8.50 port 8080
config server index 2 ip 10.65.8.51 port 8080
config server index 40 ip 10.65.8.52 port 80
config server index 41 ip 10.65.8.53 port 80
#----------------------------------------------------------------
# server-groups
#----------------------------------------------------------------
config server-group name web1_layer4 policy rr server-last-resort
index 1
config server-group name web1_layer4 add-server index 1 - 2
config server-group name web2_layer7 policy rr server-last-resort
index 40
config server-group name web2_layer7 add-server index 40 - 41
#----------------------------------------------------------------
# service-table
#----------------------------------------------------------------
config service vip 10.65.36.21 port 2000 protocol tcp l4
server-group-name web1_layer4
config service vip 10.65.36.22 port 3000 protocol tcp l7 class http
config domain name default
config pattern-rule "default" server-group-name sg0
config domain name mydomain.com
config pattern-rule "default" server-group-name web2_layer7