Filter
Top Products
24 XTP CrossPoint 1600 and 3200 • Remote Control 25XTP CrossPoint 1600 and 3200 • Remote Control
SIS Command and Response Table for Matrix Switcher Commands
Command SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Create ties
NOTES: • Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*24$.
• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).
• The & tie command for RGB and the % tie command for video can be used interchangeably, as can the & read tie command for RGB
and the % read tie command for video.
• Audio breakaway command functions are dependent on the audio routing selections of the inputs and outputs.
Tie input
X! video and audio to
output
X@
X!
*X@! OutX@•InX!•All]
Tie the video and audio from input
X!
to output
X@
.
Example:
1*3!
Out03
•In01•All]
Tie input 1 to output 3.
Tie input
X!
to output
X@
, R
GBHV
X!*X@& OutX@•InX!•RGB]
Tie input
X!
RGB to output
X@
. Audio is broken away.
Example (see Notes, above):
10*4&
Out04
•In10•RGB]
Tie input 10 RGB to output 4.
Tie input
X!
to output
X@
, video
X!*X@% OutX@•InX!•Vid]
Tie input
X!
video to output
X@
. Audio is broken away.
Example (see Notes, above):
7*5%
Out05
•In07•Vid]
Tie input 7 video to output 5.
Tie input
X!
to output
X@
, audio
X!*X@$ OutX@•InX!•Aud]
Tie input
X!
audio to output
X@
. Audio is broken away.
Example (see Notes, above):
24*04$
Out04
•In24•Aud]
Tie input 24 audio to output 4.
Tie input
X!
to all outputs
X!*! InX!All] X!*&
,
X!*%
, and
X!*$
are also valid.
Quick multiple tie
E+QY!*Y@!...Y!*Y@$}
Enter multiple tie commands (
!
,
&
,
%
, and
$)
before the
}
.
Qik
]
Read output tie
X@& X!]
RGBHV input
X!
is tied to output
X@
.
X@&
,
X@%
, and
X@$
are also valid.
NOTE: • = Space
X!
= Input number 00 – 16 or 32 (00 = untied)
X@
= Output number 01 – 16 or 32
Command SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Input video format (available for inputs on an XTP CP 4i VGA universal analog input board only)
Set format
X!
*
Y#
\ Ityp
X!
*
Y#
*
Y$]
Set input
X!
to
Y#
video format. The board reports the
detected video format,
Y$
, in response.
Example:
1*0\
Ityp1*0*5
]
Set input 1 to auto. The board reports RGB video.
View format
X!
\
Y#
*
Y$]
Show set (
Y#
) and detected (
Y$
) video format for input
X!
.
Auto-Image (available for inputs on an XTP CP 4i VGA universal analog input board only)
Execute an auto image
X!
A Aadj
X!]
Execute image sizing, centering, and ltering adjustments
on input
X!
.
Color (available for inputs on an XTP CP 4i VGA universal analog input board only)
NOTE: Color adjustments are available for RBGcvS (SCART), interlaced component video (YUVi), S-video, and NTSC composite video inputs.
Set a specic color value
E
I
X!
*
X%
COLR
}
ColrI
X!
*
X%]
Specify the color adjustment.
Increment color value
E
I
X!
+COLR
}
ColrI
X!
*
X%]
Increase the color setting by one.
Decrement color value
E
I
X!
–COLR
}
ColrI
X!
*
X%]
Decrease the color setting by one.
View the color value
E
I
X!
COLR
} X%]
Show the color setting.
NOTE:
X!
= Input number 01 – 16 or 32
Y#
= Set input video format 0 = Auto
1 = Video 4 = YUV interlace
2 = S-video 5 = RGB
3 = SCART 6 = YUV
Y$
= Detected video format Identical to
Y#
, above, except 0 = no signal.
X%
= Picture adjustments 0 through 255