Filter
Top Products
AVTrac • Quick Installation Checklist
Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA / Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron EMEA
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
Installation of the AVTrac can be divided into six main sections:
Step 1 — Before Getting Started
Decide where the Track will be placed (pages 4 and 5) and, if necessary, prepare
the site.
Open the two boxes containing the AVTrac kit and identify all the items provided
(pages 2 and 3).
Gather any additional tools needed for installation (page 6).
Step 2 — Install Track
Remove existing carpeting (page 7).
If cables will be run through a drywall cavity, cut a hole in drywall (page 8).
Measure and cut track pieces (page 9).
Secure the track to the floor (pages 10 and 11).
Step 3 — Install Connectivity Box
Remove the top cover and end plates from connectivity box (page 10) and place
the box on the track (page 12).
Secure the connectivity box to the track and floor (page 12).
Step 4 — Install AC Power Module
If necessary, wire the AC power receptacle (page 13).
Seat and secure AC power module in connectivity box (page 14).
Run AC conduit and connect to junction box (page 14).
Step 5 — Install Architectural Adapter Plates
Install AAPs in connectivity box cover panel (page 15).
Run and connect cables to the AAPs (page 15).
Reattach the end plates and cover panel (page 15).
Step 6 — Finishing Up
Snap on cover track (page 16).
Cut and glue carpet to side and end ramps (pages 16 and 17).
Trim wall baseboards and apply carpet or rubber strip finish to cover track
raceway (page 17).
Quick Installation Checklist
©
2008 Extron Electronics. All rights reserved.