Filter
Top Products
Specifications, cont’d
Matrix 50 Series Switchers • SpecificationsA-2
Specifications
Video
Routing.......................................... 8 x 4, 8 x 8, 12 x 4, or 12 x 8 matrix
Gain ............................................... Unity
Bandwidth .................................... 150 MHz (-3dB), fully loaded
0 - 10 MHz................. no more than 0.1dB to -0.1dB
0 - 130 MHz............... no more than 0.5dB to -0.5dB
Phase between I/Os .................... <1.28º at 3.58 MHz
Differential phase error .............. 0.1%, 3.58 and 4.43 MHz
Differential gain error ................. 0.1º, 3.58 and 4.43 MHz
Max. propagation of delay ......... 5 ns typical (±1 ns)
Crosstalk ....................................... -50dB @ 5 MHz
Switching speed ........................... 200 ns (max.)
Video input
Number/signal type ................... 8 or 12 RGsB, RsGsBs, component video (Y, R-Y, B-Y), HDTV, S-video,
composite video
Connectors .................................... (8 or 12) x 1, 2, or 3 BNC female
Nominal levels ............................. 1V p-p for Y of component video and S-video, and for composite video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels ...... Analog: 0.5V to 2V p-p with no offset
Impedance .................................... 75 ohms
Return loss .................................... -30dB @ 5 MHz
Maximum DC offset .................... 1.5V
External sync (genlock)............... 0.3V to 0.4V p-p
Video output
Number/signal type ................... 4 or 8 RGsB, RsGsBs, component video (Y, R-Y, B-Y), HDTV, S-video,
composite video
Connectors .................................... (4 or 8) x 1, 2, or 3 BNC female
Nominal levels ............................. 1V p-p for Y of component video and S-video, and for composite video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels ...... 0.5V to 2.0V p-p
Impedance .................................... 75 ohms
Return loss .................................... -30dB @ 5 MHz
DC offset ....................................... ±5mV maximum with input at 0 offset
Switching type ............................. Vertical interval
Sync
Input type ..................................... RGsB, RsGsBs
Output type .................................. RGsB, RsGsBs
Genlock connectors ..................... BNC female
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Routing.......................................... 8 x 4, 8 x 8, 12 x 4, or 12 x 8 matrix
Gain ............................................... Unbalanced output: 0dB; balanced output: +6dB
Frequency response..................... 20 Hz to 20 kHz, ±0.05dB
THD + Noise ................................ 0.03% @ 1 kHz at nominal level
S/N ................................................ >90dB, balanced, at rated maximum output (21dBu)