Filter
Top Products
3-17IN1508 Scaling Presentation Switcher • Operation
Center selection
The Center selection displays two status indicator bars that show, and allow you to
adjust, the horizontal and vertical position of the main or picture-in-picture output
on the monitor.
If the PIP feature is turned off (the front panel PIP On LED is unlit), Center adjusts
the position of the main window.
If the picture-in-picture feature is turned on (the front panel PIP On LED is lit),
Center adjusts the position of the PIP window.
The center adjustments do not crop the image or add blank lines.
Use the front panel or IR remote control
and buttons to highlight the horizontal (H)
or vertical (V) centering status indicator bar. Use the front panel or IR remote
control and buttons to move the image.
Size selection
The Size selection displays two status indicator bars that show, and allow you to
adjust, the horizontal and vertical size of the output. Use the front panel or IR
remote control
and buttons to highlight the horizontal (H) or vertical (V) size
status indicator bar. Use the front panel or IR remote control and buttons to
increase or decrease the size.
Zoom selection
The Zoom selection displays a status indicator bar that allows you to adjust the
zoom level of the output. Use the front panel or IR remote control
and buttons
to increase or decrease how much zoom (enlargement) is applied to the image.
Pan selection
The Pan selection displays two status indicator bars that allow you to pan (move)
horizontally and vertically on a zoomed image. Use the front panel or IR remote
control
and buttons to highlight the horizontal (H) or vertical (V) pan status
indicator bar. Use the front panel or IR remote control and buttons to pan left
and right or up and down.
Aspect ratio selection
The Aspect ratio selection displays a selection box that shows the currently selected
aspect ratio and allows you to select another aspect ratio.
Use the front panel or IR remote control
and buttons to highlight the desired
aspect ratio. Press the Enter button to change to the highlighted value. The default
is 4:3.