Filter
Top Products
3-23IN1508 Scaling Presentation Switcher • Operation
Audio Delay selection box
The Audio Delay selection box provides the ability to turn audio delay on and off.
Audio delay compensates for the latency period that is inherent in deinterlacing
NTSC, PAL, and SECAM video by delaying the audio output to match the video
output. Use the front panel or IR remote control
and buttons to select On or
Off. The default is On.
Advanced submenu
Figure 3-17 is a flowchart that shows an overview of the Advanced submenu, its
available selections, and their available settings.
Timeout
Timeout
Timeout
Timeout
Timeout
Timeout
Timeout
Timeout
Timeout
Timeout
Timeout
Timeout
No
menu
display
AUDIO
PICTURE
INPUT
OUTPUT
ADVANCED
MenuMenu
Timeout
Timeout
Timeout
Timeout
Menu
Menu
Menu
Menu
Menu
Enter
Enter
Enter
Menu
Menu
Menu
Menu
Menu
Menu
Freeze
Freeze
Blank
Blank
Swap
Swap
PIP Mode
PIP Mode
Fade Switch
Fade Switch
Timeout
Menu
Timeout
Menu
Enter
Menu
Blue Mode
Blue Mode
Reset
Reset
Ok
Cancel
Off
On
Off
On
PIP 1/9 Screen
PIP 1/16 Screen
PIP 1/4 Screen
Side by Side Norm AR
Side by Side Full Scrn
PIP 1/25 Screen
Enter
Off
On
Menu
Enter
Menu
Off
On
Menu
Enter
Press Enter to
select a change.
Press Enter to
select a change.
Press Enter to
select a change.
Press Enter to
select a change.
Press Enter to
select a change.
Press Enter to
select a change.
Press Enter
to swap PIP.
Figure 3-17 — Advance submenu flowchart
Freeze selection box
The Freeze selection box provides the ability to turn the freeze feature on and off.
Freeze stops the image at the moment you activate the feature and outputs a still
image. Use the front panel or IR remote control
and buttons to select On or Off
and press the Enter button.
When the output is frozen, the video input can be removed without losing the
displayed image.
If a different input is selected (see
2
on page 3-3), the switching action deselects
the freeze function and the frozen image is lost.
Blank selection box
The Blank selection box provides the ability to mute the scaled video, resulting in a
black screen (except for any active on-screen displays). Use the front panel or IR
remote control
and buttons to select On or Off and press the Enter button.
If a different input is selected (see
2
on page 3-3), the blanking action is deselected
and the newly selected input is scaled and displayed.