Filter
Top Products
8. Click the Save button beside the file name that you entered. The e-mail alert
information is saved on the PCS4, and the Save button becomes Edit again.
9. Repeat steps 5 through 8 for each e-mail recipient address that you want to add or edit.
Upgrading firmware
The Firmware Upgrade screen lets you browse to locate and upload a new version of
firmware for your unit. The uploaded file must have the file extension .S19.
NOTE: The PCS4 .S19 file is not the same as the .S19 files of other products and is not
interchangeable with the firmware upgrade files of any other product.
Figure 17. Firmware Upgrade Screen
To upload a new version of firmware:
1. On the side-bar menu of the Configuration tab, click Firmware Upgrade. The
Firmware Upgrade screen is displayed, showing the version of rmware that is currently
loaded.
2. Click Browse to open a Windows le selection window.
3. On the file selection window, locate the new firmware version file on your server
and double-click it. (Firmware files must have the extension .S19.) The firmware file
name and path are displayed in the Current Firmware Version section on the Firmware
Upgrade screen.
4. Click Upload. When the rmware upgrade is complete, the Power LED on the unit
blinks three times.
NOTE: If you attempt to upload a file with an extension other than .S19, the PCS4
recognizes it as invalid and ignores it, reverting to the factory installed
firmware version.
Managing receptacles
On the Switching/Grouping screen, you can switch power on and off to each individual
receptacle, group the receptacles together, and power each group on and off. You can also
view the threshold settings (Full, Standby, None, or Not Set) indicating the device power level
at which the alarm relay will be activated for each receptacle.
NOTE: You cannot set the reference thresholds on this screen. This can be done only
from the IPL T PCS4 front panel or via SIS commands. See “Setting Power
Level Reference Thresholds” in the “Front Panel Features and Operation”
section or the “SIS Programming and Control” section for information on
setting thresholds from the front panel or via SIS commands.
IPL T PCS4 • HTML Configuration and Control 27