Filter
Top Products
Part Numbers and Accessories
Included Parts
These items are included in each order for an IPL T PCS4 or IPL T PCS4i interface:
Included Parts Part Number
IPL T PCS4 or
IPL T PCS4i
60-544-07
60-544-09
Rubber feet (self-adhesive) (4)
2-pole captive screw connector (1)
14 AWG IEC power cord (IPL T PCS4 only)
Tweeker (small screwdriver)
IPL T PCS4 and IPL T PCS4i User Guide
Power cord caution card
Optional Accessories
These items are optional for the IPL T PCS4 or the IPL T PCS4i:
Optional Accessories Part Number
RSU 129 Universal Rack Shelf Kit 60-190-01
RSB 129 Basic Rack Shelf 60-604-02
MBU 125 Under Desk Mounting Kit 70-077-01
Mounting the IPL T PCS4 Interface
The IPL T PCS4 can be set on a table, mounted on a rack shelf, or mounted under furniture
such as a desk, podium, or tabletop.
Tabletop Use
Four self-adhesive rubber feet are included with the PCS4. For tabletop use, attach one foot
at each corner of the bottom side of the unit, and place the PCS4 in the desired location.
Rack Mounting
UL guidelines for rack mounting
The following Underwriters Laboratories (UL) guidelines pertain to the installation of the
IPL T PCS4 in a rack:
• Elevated operating ambient temperature — If the equipment is installed in a closed
or multi-unit rack assembly, the operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore, consider installing the
equipment in an environment compatible with the maximum ambient temperature
(TMA) specified by the manufacturer.
• Reduced air flow — Install the equipment in the rack so that the amount of air ow
required for safe operation of the equipment is not compromised.
• Mechanical loading — Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
IPL T PCS4 • Reference Material 56