Filter
Top Products
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
EDID
Set EDID information
EAX2@EDID} EdidAX2@]
Set the EDID resolution and refresh
rate.
View EDID information
EAEDID} EdidAX2@]
View the EDID resolution and
refresh rate.
Advanced Configuration
HDCP authorized device
HDCP authorized device on
EE1HDCP} HdcpE1]
Set the transmitter as an HDCP
authorized device.
HDCP authorized device off
EE0HDCP} HdcpE0]
Set the transmitter as not an HDCP
authorized device.
View HDCP authorized
device setting
EEHDCP} HdcpEX2!]
View the HDCP authorized device
setting.
Video mute
Mute output to black
1B
Vmt1
]
Mutes video and displays a black
screen.
Unmute output
0B
Vmt0
]
Unmute the video.
View the video mute status
B
Vmt
X*]
View the video mute status.
Test pattern
Set test pattern
X^J TstX^] Set color bars test pattern to X^.
View test pattern
J
Tst
X^]
View the current test pattern.
Reset mode
Reset to factory defaults
EZXXX} Zpx]
Resets all user settings back to
factory defaults.
Status
View input signal presence
OLS
Frq
X1^]
View the input signal presence.
Query HDCP input
EIHDCP} HdcpIX(]
Query the HDCP status.
Query firmware version
Q
x.xx
]
Query the firmware version.
Query full firmware version
*Q
x.xx.xxxx
]
Query the full firmware version.
Query part number
N
60-1043-12
]
Query the device part number.
NOTE: X^ = Color bars test pattern 0 = off (default)
1 = 1280x720p at 50 Hz
3 = 1280x720p at 60 Hz
5 = 1920x1080p at 60 Hz
X* = Video mute 0 = off or disabled
1 = on or enabled (mute to black)
X( = HDCP status 0 = no source connected
1 = HDCP-compliant source connected
2 = non-HDCP-compliant source connected
X1^ = Video signal status 0 = video or TMDS signal not detected
1 = video or TMDS signal detected
X2! = HDCP authorized device status 0 = off
1 = on (default)
X2@ = EDID emulation See the table on page 18.
XTP T HDMI Transmitter and XTP R HDMI Receiver • SIS Configuration and Control 20