Filter
Top Products
Setting up the digital surround processor
11
You specify whether you are using the digital or analogue output
for each channel in the Speaker Set configuration option; see
Setting up the speaker outputs, page 28. Note that you should
always leave the unused analogue or digital output for each
channel unconnected.
The analogue connections should be made using high-quality
screened cable, taking care to connect the left and right
channels correctly.
The digital connections should be made with high-quality 75Ω
screened cable. Suitable cables are available from Meridian. We
do not recommend using analogue audio cables, which do not
have adequate shielding or the correct impedance, or cables
intended for UHF applications, as these do not provide
adequate shielding in the 1–30MHz region.
Optical connections should be made using a suitable optical
fibre supplied by your dealer.
Communications connections
The following table gives details of the communications
connections:
Use this connection To connect to this
COMMS Other Meridian 500 Series
equipment, and the master
digital speaker.
S-LEADS To distribute the S-lead
connections from the master
digital speaker to other slave
digital speakers.
RS232 connection
The RS232 connection is for future expansion, to allow the 565
to be interfaced to a computer. Contact your dealer for more
information.