Filter
Top Products
Configuring the digital surround processor
19
Configuring the digital
surround processor
This chapter explains how to configure the digital surround processor to
suit the speaker arrangement you want to use, and the other equipment in
your system.
The first stage in configuring the digital surround processor is to choose
one of the standard Type settings, which are designed to set most of the
parameters to typical values.
The next stage is to configure the 565 for those aspects of your layout that
differ from the standard setting you chose.
The third stage is then to set up the speaker outputs, and adjust the delay
of each output to time-align the system. These three stages are described
in detail in the following sections.