Filter
Top Products
FS-8700-21 LonWorks Manual Page 20 of 62
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
6.2.7 Using Neuron ID to Address Devices (Client Drivers only)
It is possible to poll remote LonWorks devices using their Neuron ID's instead of the traditional Network Manager method. The Neuron ID is the 12 Digit Hex identifier of
the associated LonWorks Device. An example configuration follows.
Note that Neuron ID addressing is considered explicit addressing so the station address, domain ID and subnet ID must be set as described in Section 6.1.4
Bridge
System_Station_Address
,Title
110
,":D01:S01:Neuron ID Example:"
On the Client side Nodes add a new field as shown below:
Nodes
Node_Name
,Node_ID
,Protocol
,Neuron_ID
Lon_Srv_11
,11
,Lonworks
,F912AB440100
Create a Map Descriptor as Follows:
Map_Descriptors
Map_Descriptor_Name
,Data_Array_Name
,Data_Array_Offset
,Lon_Function
,Function
,Node_Name
,SNVT_Index
,SNVT_Type
,Scan_Interval
1nviAmp1
,DA_001
,0
,NMFETCHC
,RDBC
,Lon_Srv_11
,000
,SNVT_amp
,0s