First Virtual Communications 3000 Network Router User Manual


 
RAID Controller Configuration
4-5
and then click on Settings, Communications
Select the appropriate COM port. In our example we have connected to the second serial port
so we use COM2. Set the baud rate to 9600, data bits to 8, stop bits to 1, parity to none and
flow control to Xon/Xoff.
The VOYAGER 3000 monitor utility provides complete control over the configuration and
operation of the controller. You may also use the utility to view the status of the controller’s
RAID sets and monitor the progress of create operations. It is also possible to use the monitor
utility to view the I/O performance of the system. Use the arrow keys to navigate through the
Figure 4-7 Windows Terminal Preferences Screen
Figure 4-8 Windows Terminal Communications Settings