Filter
Top Products
Voyager 3000 User Guide
4-10
After the drives are selected we back up through the menus by pressing the v key. The next
dialogue to appear prompts the user to assign the maximum capacity of the RAID set. In our
example we will use all of the available drive capacity which is 4095MB. To alter the capacity
press the e key and type in the desired value. Figure 4-17 shows the dialogue for
entering the drive capacity.
Pressing the v key will bring up the dialogue shown in Figure 4-18
Select Yes and press the e key. The status of the RAID set creation is shown to the user .
Figure 4-16 Selecting drives for inclusion in a RAID set
Figure 4-17 Setting the maximum drive capacity.
Figure 4-18 Logical drive creation confirmation screen