Fluke Ti50 Power Supply User Manual


 
Camera Setup
Naming Image Files
6
6-7
2. Use the MOUSE controller to position the pointer over Camera Settings
on the popup menu.
3. Tap E.
4. Position the pointer over the Save tab and tap E.
5. Position the pointer over Compact Flash in the Load Settings From row
and tap E.
6. Tap the TRIGGER button to accept setting change and return to scan
target mode.
To restore factory settings:
1. Tap F.
2. Use the MOUSE controller to position the pointer over Camera Settings
on the popup menu.
3. Tap E.
4. Position the pointer over the Save tab and tap E.
5. Position the pointer over Restore Factory Settings and tap E.
6. Tap the TRIGGER button to accept setting change and return to scan
target mode.
Naming Image Files
When you save an image, its name is added to the upper left corner of the
image display.
An image name looks like this: IR00020060515_0001
IR is prefix (The prefix assigned to the image is based on the prefix last
assigned and stored in the camera settings.)
20060515 is the eight-digit date
0001 is the four-digit sequencing number
Changing Image File Name Prefix
To change the prefix used in the saved image name: