Filter
Top Products
Security functions
Password protection for the hard disk
Passwordprotection:
The had disk password prevents un authorised access to the hard disk drives
and is checked internally each time the system is booted. The c ondition fo r th is
is that you have assigned at least the supervisor password.
Activating hard disk protection
► Call up the BIOS Setup and select the Security menu.
If you have not assigned BIOS passwords yet, define the supervisor and the user
password now, if desired (see "
Securit y functions", Page 44).
► Mark the Hard Disk Security field and press the Enter key.
► In the Dr ive0 area mark the Set Master Password field and press the Enter key.
Enter new Password then appears and you are asked to enter a password.
► Enter the password and press the Enter key.
Confirm new Password requires you to confirm the password.
► Enter the password again and press the Enter key.
Setup Notice: Changes have been saved is displayed to confirm t hat the
new password has been saved.
► To assign th e password for the second hard disk (Drive 1), go to the Drive1 area and
select the field Set Master Password, then pro cee d in exactly t he same way as for
setting up the password for the first hard disk (Drive0).
The field Password Entry on Boot is set to Enabled by default. You can exit the BIOS
Setup once you ha ve finished changing the settings.
► From the Exit menu, cho o se the option Exit Saving Changes.
► Press the Enter key and select Yes.
The notebook reboots and your hard disk is now protected with a password. The system
will ask you to enter the password when the notebook is restarted again.
Deactivating hard disk protection
To cancel a password without setting a new one, proceed as follows:
► Call up the BIOS Setup and select the Security menu.
► Mark the Hard Disk Security field and press the Enter key.
► In the Dr ive0 area mark the Set Master Password field and press the Enter key.
You will be initially requested to enter the old password by the Enter current Password prompt.
You will then be requested to enter a new password by the Enter new Password prompt.
► After entering the password, press th e Enter key three times.
► From the Exit menu, cho o se the option Exit Saving Changes.
► Press the Enter key and select Yes.
The notebook reboots, and passwo rd protection for the hard disk is cancelled.
► To cancel the password for the second hard disk (Drive1), go to the Drive1 area
and select the field Set Master Password, then proceed in exactly the same wa y as
for cancelling the password for the first hard disk (Drive0).
Fujitsu Technology Solutions 47