Filter
Top Products
Troubleshooting and tips
The external monitor remains bl
ank
Monitor
Cause Troubleshootin g
Monitor is switched off. ► Switch the external monitor on.
Power s aving has been activated (monitor is
blank).
► Press any key to continue.
Brightness is s et to dark.
► Adjust the brightness of the
monitor.
Screen output is set to the notebook’s LCD
screen
► Press the key combination
to switch the
screen output, see "
Key c
ombina tions",
Page 25.
The external monitor’s
power cable or data
cable is not connected p
roperly.
► Switch off the external monitor and the
notebook.
► Check whether the power cable is plugged
properly into the external monitor and into
the power socket.
► Check whether the data cable is properly
connected to the notebook and the external
monitor (if it is plugged in with a connector).
► Switch on the external monitor and the
notebook.
The external monitor is blank or the image is unstable
ScreenMonitor
Cause Troubleshootin g
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.
► Terminate the application program in
Windows by pressing
Alt
+
F4
.Ifthe
fault persists after c losing the program, use
the key combination for switch ing the screen
output (see "
Key combinations", Page 25)to
switch over to the notebook’s LC D screen.
Change the following setting:
► Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
► Select monitor: Select m onitor 1 or 2 as
described in the documentation for your
operating system.
Fujitsu Technology Solutions 65