Filter
Top Products
Removing and inst alling components
during servicing
Attaching the cover
1
2
2
► Place the cover in the correct mounting position ( 1).
If you remove more than one component at the same time, keep the screws for the
individual components separately from each other and make su re that you use th e
correct screw s. If you install the wrong screws, components may be damaged.
► Tighten the screws (2).
► Insert the ba
ttery (see Chapter "Inserting battery", Page 33).
Finishing component removal
After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see "
Inserting battery", Page 33).
► Turn the
notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you d isco nnected before.
Fujitsu Technology Solutions 59