Filter
Top Products
D2630 (RX600 S3) SAS 19
Features Connectors and jumpers
Settings with jumpers
The system board is supplied with all jumpers set on the following positions.
Figure 7: Jumper default settings
J4A1 (26) - Password Clear
J4A2 (27) - BIOS Write Protect
J4A3 (28) - BIOS Recovery
23 = IPMI connector 29 = J4A4 (jumper)
24 = GCM connector (not used) 30 = LAN 1 (top)
25 = RAID Activation Key (RoMB) 31 = LAN 2 (bottom)
26 = J4A1 (jumper) 32 = Dual USB connector
27 = J4A2 (jumper) 33 = Serial connector (top)
28 = J4A3 (jumper) 34 = Video connector (bottom)
1-2 Password enabled
2-3 Password disabled/cleared
1-2 BIOS unprotected
2-3 BIOS write protected
1-2 Normal boot
2-3 BIOS recovery
13
J4A1 = Password Clear
J4A2 = BIOS Write Protect
J4A3 = BIOS Recovery
J4A4 = NVRAM Clear
J8C2 = BMC Reset