Fujitsu D2630 Computer Hardware User Manual


 
20 D2630 (RX600 S3) SAS
Connectors and jumpers Features
J4A4 (29) - NVRAM Clear
J8C2 (1) - BMC Reset
3.6.1 External connectors
Figure 8: External connectors I/O shield
LAN connectors
On this system board you will find one GbE Broadcom LAN controller 5704C.
This LAN controller supports the transfer rates of 10 Mbit/s, 100 Mbit/s and
1 Gbit/s. The LAN controller supports WOL function through Magic Packet™.
It is also possible to boot a device without its own boot hard disk via LAN. Here
Intel PXE is supported.
1-2 NVRAM settings are not cleared
2-3 NVRAM settings cleared
1-2 BMC enabled
2-3 BMC disabled
1 = Video connector 4 = LAN 1
2 = Serial connector 5 = LAN 2
3 = Dual USB connector 6 = GCM connector (not used)
12 345
6