Filter
Top Products
D2630 (RX600 S3) SAS 25
Features Replacing the RAID Controller
J9 I
2
C connector 3-pin connector
Used for enclosure management.
Reserved for internal use
J10 Write Pending Indication
LED
2-pin connector
Connector for enclosure LED.
When lit, it indicates the onboard cache
contains data and a write from the cache
to the hard drives is pending. Optional.
J11 x4 SAS ports 0 - 3 SFF 8484 x4 connector for connection to
physical drives and expanders.
J12 GND connector Reserved for internal use
J13 GND connector Reserved for internal use
J14 GND connector Reserved for internal use
J15 I
2
C connector 4-pin connector
Used for enclosure management.
Reserved for internal use
J18 SMBUS header for
enclosure management
3-pin header
Used for enclosure management.
Reserved for internal use
Step 4 Remove the RAID SAS controller from the Mainboard
Remove the PCI card hold down latches that fix the RAID SAS
controller to the computer chassis.
Remove the RAID SAS controller from the PCI Express slot on
the motherboard (see your mainboard guide for information
about the PCI Express slot).
Jum-
pers
Type Description
Table 2: Jumpers and Connectors