Filter
Top Products
22 D2630 (RX600 S3) SAS
Replacing the RAID Controller Features
3.8 Replacing the RAID Controller
The MegaRAID™ SAS 8408E RAID controller is part of your system board
D2630. It offers the following features:
● Eight internal SAS/SATA ports - Two x4 SFF 8484 connectors
● 3 Gb/s throughput per port
● RAID Levels 0, 1, 5, 10, and 50
● RAID 6 and 60 ready
1
● Greater than 2 TB array support
● Intel
®
IOP333 I/O Processor
● PCI Express 1.0a compliant
2.5 Gb/s and x8 interface
● 256MB DDRII 400 MHz SDRAM
● Optional intelligent transportable battery backed DIMM module
● Advanced data integrity and recovery
● Enhanced error handling and reporting
● FlexRAID
®
:
– Online Capacity Expansion (OCE)
– Online RAID Level Migration (RLM)
● Comprehensive management and configuration utilities
● Full SAS expander support (32 disk support)
This section describes what you have to do, when the RAID controller is
defective and has to be replaced.
Please take a few minutes to read this installation guide before you install a new
controller.
1
available in a subsequent release