Filter
Top Products
Setup Mode
USING SETUP MODE
User's Manual 5-43
Quick
Reference
Introduc-
tion
Setting Up
Paper
Handling
Printing
Setup Mode
Table 5.6 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG Items Options Description
<AREACNT> Area-over detection control.
ENABLE Detects the left and right edges of
paper when loading the paper.
The printer does not print data beyond
the edges, but turns on the AREA
OVER indicator.
DISABLE Does not detect the edges. Select this
option when you are using colored or
preprinted paper.
<ON-LOAD> Printer status after loading paper in
offline mode.
OFFLINE Remains offline after paper loading.
ONLINE
Goes into online after paper loading.
<LOCK>
Lock function of setup mode.
NONE Enables all buttons on the control panel.
SETUP Disables the setup-related buttons to keep
the printer from entering setup mode during
the offline state.
ALL Disables the setup-related buttons and the
MENU button.
Once this setting has been selected, setup
mode cannot be entered from the control
panel. To cancel this setting, turn the
power on while simultaneously pressing the
MENU, TEAROFF, and LF/FF buttons.
<//S//> Effectiveness of the Cut Sheet Selection
command (//S//).
DISABLE Makes the command ineffective.
ENABLE Makes the command effective.
Note:The Cut Sheet Selection command
(//S//) changes the paper source to
the paper table and waits for
manual insertion of a cut sheet.