Filter
Top Products
User's Manual
PAPER HANDLING
3-19
Quick
Reference
Introduc-
tion
Setting Up
Paper
Handling
Printing
Setup Mode
Envelopes
When printing envelopes, use the cut sheet stand or the manual feed slot.
Note the following:
• Set the paper thickness lever to best accommodate envelope thickness.
• When loading envelopes, make sure that the envelope flaps face
forward. Otherwise, the envelopes may jam in the printer.
Labels
• Be careful to check operating conditions when using labels. Labels
are sensitive to temperature and humidity.
• Only use labels mounted on continuous forms backing sheets.Do not
print labels mounted on single sheet backing. Labels mounted on
single sheet backing tend to slip and printing becomes crooked.
• Set the paper thickness lever to best accommodate label thickness.
• Do not feed labels backwards using the LOAD button from the
control panel. Jamming may occur.
• Do not use the printer tear-off feature when printing labels. If the
labels are retracted, the backing may peel off and the labels may jam in
the printer.
• Do not leave labels loaded in the printer. If labels curl around the
platen, jamming may occur when printing is resumed.
• Test-print labels before running a job. If jams occur, set the paper
thickness lever to a wider position. If jamming problems continue, try
a different type of label.