Fujitsu FD-1016AT Switch User Manual


 
11
Rear Panel
8-Port KWM Switch
(1) (2) (3) (4) (5) (6) (7)
8-port KVM Switch rear panel
(1) Power cable connector
Connect to a 100 V AC electric outlet.
(2) Connectors for servers [1 through 8]
Connect each port (1 through 8) on this device to the relevant host’s keyboard,
mouse and monitor connectors with the special cable.
(3) DIP Switches
Use for a variety of settings. Numbered from left side while facing the switches
starting from 1, 2…8; up is on and down is off.
(4) Connector for [Sun]
Connect to a SUN keyboard/mouse.
(Do not connect to the Console Drawer.)
(5) Keyboard connector
Connect a PS/2 keyboard connector (purple).
(6) Mouse connector
Connect a PS/2 mouse connector (green).
(7) Monitor Connector
Connect a monitor.
16-Port KVM Switch
16-port KVM Switch rear panel