Filter
Top Products
4
Important Notices
This chapter contains cautions that must be taken when operating the Console Drawer
and information related to safety. Carefully read this chapter to use the Console Drawer
correctly.
Safety
Precautions
This device adheres to the safety regulations related to information processing equipment
such as electronic office machines that are used in an office environment. If you have any
questions, please contact your place of purchase or a Fujitsu maintenance person.
● To prevent extreme bumping or shaking when moving the Console Drawer use the
original shipping container or a box similar to it.
● During installation and before using the Console Drawer, carefully read [Installation]
and the section about environmental conditions in [Technical Specifications] to use the
Console Drawer correctly.
● Moving the Console Drawer from a cold environment to the installation location may
cause condensation to occur. Before using the Console Drawer allow it to dry out
completely and to reach the ambient temperature of the installation location.
● Make sure that the local power supply voltage is within the acceptable range of the
Console Drawer. Make sure that the rated voltage meets the specifications of this
device (Refer to [Technical Specifications] and the model plate on this device).
● The power cable for the Console Drawer is specially certified. Do not connect it to any
place other than a grounded wall outlet.
● Arrange the immediate area around the Console Drawer's power socket and the rack's
power outlet so that the plug can be removed quickly in the case of an emergency.
● Lay all the cables so that they will not be damaged. Refer to the relevant sections in
“Connecting and Removing Cables”.
● Do not connect or remove the data transmission cables during thunderstorms.
● Do not allow foreign substances or liquids inside the Console Drawer.
● In an emergency (device or parts failure:damage caused by liquid or a foreign objects
into the Console Drawer) remove all cables from the Console Drawer as soon as
possible and contact your place of purchase or a Fujitsu maintenance person.
● Only licensed engineers can repair the Console Drawer. Any unlicensed user that
opens the Console Drawer and makes incorrect repairs may cause electric shock or
fire.
● Always hold the connector portion and do not jerk the cables when removing them.
● Avoid operating the Console Drawer with wet hands.
● Do not unplug connectors with wet hands.
● Do not place such unnecessary items on the top of the Console Drawer.
● Do not modify or repair the Console Drawer.
CAUTIO
N