Filter
Top Products
3-5
2
Fan the sheets before setting a stack of
documents on the ADF paper chute. For
details see the next page.
• Place the documents face down, with the top to the left as shown in A. (The long side is the top for
landscape mode and the short side is the top for portrait mode.)
• Holding both ends with both hands, lift the documents.
• Hold the documents tightly with your left hand and bend them as shown in B.
• Grip the documents tightly with your right hand, loosen the grip of your left hand, and straighten as
shown in C.
• Even up the feed edge of the batch of paper as shown in D.
NOTICE
Reduce the batch size of the documents if double feed or mispick occurs.
A
(For portrait mode)
A
B
C
Top
B
D
C
10mm
Document