Filter
Top Products
7-8
6. Setting the time-out limit
1 Press “Next” or “Previous” and let the
scanner display Screen 46.
<Screen 46>
2 At Screen 46, press to increase the
number or press to decrease the time-out
limit. Then press to activate the
setting.
NOTICE
Default is 30 seconds.
3 Press to return.
7. ADF Front Offset Setting
8. ADF Back Offset Setting
9. Flatbed Offset Setting
<Screen 47>
1 Press “Next” or “Previous” and let the
scanner display the following:
• Front Offset by ADF: Screen 47.
• Back Offset by ADF: Screen 48.
• Offset of the Flatbed : Screen 49.
<Screen 48>
2 At Screen 47, 48, or 49, select “Yes” by
pressing the or button, then press
. The scanner displays Screen A. (X =
7, 8, or 9)
<Screen 49>
<Screen A>
3 At Screen A, if you want to let the offset
return to default, select “Yes” otherwise “No”
then press . The scanner displays
Screen B.