Filter
Top Products
2-28
2.3 Installing the Scanner Driver and Application
If the scanning is completed without any troubles, the installation was
performed successfully.
For details on various types of scanning, refer to the "fi-4860C Operator’s
Guide" on the Setup CD-ROM.
For FUJITSU ISIS Scanner Driver
■ Preparation
Confirm the following items before starting to install the application.
• Prepare the Setup CD-ROM at hand. (Do not insert the Setup CD-ROM into the CD
drive yet).
• Confirm that the scanner is correctly connected to your PC.
■ Installing the FUJITSU ISIS Scanner Driver
1. Turn on the scanner.
Press the side of “ | ” on the Main line switch.
HINT
For details on how to connect the scanner, refer to "2.2 Connecting the
Scanner" on page 2-13.
HINT
Windows XP screenshots are used in this section. The windows and oper-
ations may slightly vary depending on your OS.