Filter
Top Products
AP-5
■ Error messages (Temporary errors: Check LED blinking)
Check LED blinks when the following errors occur except the <Hopper empty> and <Mis-pick>
errors.
<Hopper empty> The following messages are displayed if no documents are loaded on the
hopper during the scan operation. Please load documents on the hopper.
The scanning will be continued, when you load documents on the hopper for
re-scanning.
To clear this message, press the button.
HINT
The check LED does not blink when the Hopper empty errors.
(at Double feed)
HINT
"xxxx" shows the value of the Batch counter.
<Paper Jam> The following message is displayed if a document is jammed in the ADF.
Refer to the “Operator guide” included in “User manual CD-ROM” for remov-
ing the jammed documents.
HINT
One of "1" - "8" is displayed instead of "x", depending on the paper jam
status.
per E
xxxx
mp
x
Pa
ty
D
uelo
b
F
edex
xx
x
x
per Em
p
Pa
ty
per Ja
m
Pa
x