Filter
Top Products
6-36
Pick start time
This function sets the period from when paper is manually put on the hopper to when the pick opera-
tion starts.
Remarks
In units of 0.2 second
LCD display
Pick start time
Options
00.2 S to 29.8 S (Default: 01.0 S)
1. In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen (Paper
Length Check) appears.
2. Press repeatedly until “Pick start time”
appears in the lower line of the menu screen.
3. Press
ENTER
.
The option select screen appears with the
current setting 01.0S blinking (blinking indi-
cates “changeable”).
4. Press or .
The displayed option changes (00.2S to
29.8S). The value changes in 0.2 seconds.
5. When the desired value appears, press
ENTER
to save the change.
The LCD returns to the <<SETUP MODE>>
menu screen (Pick start time).
6. Press
CANCEL
two times.
The LCD returns to the Ready screen.
<<SETUP MODE>>
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Pick start time
Pick start time
05.0 S
Pick start time
01.0 S
<<SETUP MODE>>
Pick start time
The following is an example of operation when you use this function.
Ready
15C6.P65 01.2.17, 5:47 PM36