Filter
Top Products
6-37
Manual Feed Timeout
10 S
<<SETUP MODE>>
Manual Feed Timeout
Manual feed timeout
This function sets the waiting time from when the host computer issues a scan command to when
paper is manually put on the hopper. A manual feed timeout error occurs if this time elapses without
putting paper on the hopper.
Remarks
Unit: second
LCD display
Manual Feed Timeout
Options
1 S to 255 S (Default: 30 S)
1. In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen (Paper
Length Check) appears.
2. Press repeatedly until “Manual Feed
Timeout” appears in the lower line of the
menu screen.
3. Press
ENTER
.
The option select screen appears with the
current setting 30 S blinking (blinking indi-
cates “changeable”).
4. Press or .
The displayed option changes (1 S to 255 S).
The value changes in seconds.
5. When the desired value appears, press
ENTER
to save the change.
The LCD returns to the <<SETUP MODE>>
menu screen (Manual Feed Timeout).
<<SETUP MODE>>
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Manual Feed Timeout
Manual Feed Timeout
30 S
The following is an example of operation when you use this function.
15C6.P65 01.2.17, 5:47 PM37