Filter
Top Products
C141-F037-02EN v
PREFACE
This manual explains concerning the MAF3364FC, MAG3182FC and MAG3091FC (hereafter, MAG
series) series of 3.5 inch hard disk drives with built-in SCSI controller.
This manual gives detailed explanations of device configuration, fault analysis, parts replacement,
operation check, adjustment, and hardware operation principles for the disk drives.
This manual is for engineers who have used fixed-type magnetic disk drives and are familiar with the
operation environment of magnetic disk drives in user systems.
For the organization of manuals related to these disk drives and the scope of descriptions in this manual,
see the "Manual system" described later. A full understanding on the contents of all volumes of the OEM
manuals is assumed. (The OEM manuals have volumes covering product specification and installation
procedure, interface specifications, and command processing functions and command specifications).
This manual is organized as follows:
This manual consists of the 5 chapters shown below, a Glossary and a list of Abbreviations.
CHAPTER 1 SPECIFICATIONS AND EQUIPMENT CONFIGURATION
This chapter explains concerning the basic specifications, the basic configuration, interface connector,
setting switches and setting plug of the MAF3364FC and MAG series disk drives.
CHAPTER 2 MAINTENANCE AND DIAGNOSIS
This chapter describes the basic requirements for maintenance of the MAF3364FC and MAG series disk
drives. This chapter also describes diagnostic methods for operation check and the basics of
troubleshooting the disk drives.
CHAPTER 3 FAULT ANALYSIS
This chapter describes how to collect fault analysis information and how to analyze the collected information.
CHAPTER 4 REMOVING AND REPLACING PARTS
This chapter describes how to remove and replace parts that can be replaced in the field.
CHAPTER 5 OPERATION PRINCIPLES
This chapter describes the hardware configuration and operation of the MAF3364FC and MAG series disk
drives.
GLOSSARY
ABBREVIATIONS