Filter
Top Products
E-10
SELECTOR SECTION – REAR
PART NAMES AND FUNCTIONS (Continued)
AUDIO
INPUT
VIDEO5 VIDEO6 RGB1 RGB2
DIGITAL1 DIGITAL2
VIDEO1
PICTURE
INPUT
DIGITAL
AUDIO
OUTPUT
DISPLAY OUTPUT
VIDEO2
VIDEO4
mD-sub
PICTURE AUDIO
VIDEO5
VIDEO1
Y P
B/CB PR/CR
COMPONENT VIDEO
Y PB/CB PR/CR
COMPONENT VIDEO
RGB2
RGB1
DVI
SCART SCARTSCART
1 Audio input terminals
Input audio through the terminals corresponding to the used video input terminals.
*The digital input terminals can be matched as desired with the remote control. (See P. E-27.)
2 Audio output terminals
For use when the audio from an audio system (amplifier) is used.
3 Video1 input terminal
4 Video2 input terminal
5 Video4 input terminal
Connect this terminal to the SCART terminal of your VCR or DVD, etc.
* See “SETTING THE INPUT TERMINALS” on P. E-41.
6 Video5 input terminal
7 Video6 input terminal
Connect this terminal to the component video output terminal of your DVD, etc.
8 RGB1 input terminal
Connect this terminal to the monitor (DVI-D) output terminal of your PC.
9 RGB2 input terminal
Connect this terminal to the monitor (mD-sub) output terminal of your PC.
0 Display output terminals (Picture/Audio)
Connect these terminals to the picture input terminal and audio input terminals on the display.
A Power input terminal
Connect this terminal to the power cable supplied with the display.
03.10.24, 0:46 PMPage 10
Downloaded From TV-Manual.com Manuals